Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Model:400J6; Outer Circumference: 40" (1016mm); Width: 0.55" (14mm); Thickness: 0.14" (3.5mm).
BulletPoint2 : Made from EPDM rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
BulletPoint3 : The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
BulletPoint4 : Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, lawnmowers, drills, and saws.
BulletPoint5 : Notice: Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys, and shaft too great.
Color : Black
CompatibleDevices : Lawn Mower
ExternallyAssignedProductIdentifier1 : 190859950738
ExternallyAssignedProductIdentifier2 : 0190859950738
ItemName : uxcell 400J6 PJ V-Ribbed Belt 6 Ribs 40" Length x 0.55" Width, EPDM Poly V Belt
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : uxcell
Material : Rubber
Material1 : Neoprene
Material2 : Rubber
ModelNumber : 4LK430
NumberOfItems : 1
PartNumber : a23122300ux0181
ProductDescription : DescriptionsV-belts are the most common type of drive belt used for power transmission. The V-shaped ribs increase the contact area between the belt and pulleys, they provide the best combination of traction, speed transfer, load distribution, and extended service life.
The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
Made of EPDM rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, drills, and saws.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys, and shaft too great.
How to measure the length of the required belt?Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2024-01-17T03:10:41.882Z
Size : 400J6
StreetDate : 2017-07-11T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800