Cart 2 india

Specification
Brand : Arbutin
BulletPoint1 : Easy to Install - This rear view camera bracket generally fit the rear cameras.Replace the small mount with license plate mount, easier to install
BulletPoint2 : One screwdriver is included, when installing your backup camera to this license plate bracket, please pay attention to the up and down of the image of your reverse camera
BulletPoint3 : This bracket mount is rear view camera accessory, this backup camera license plate mount includes license plate bracket, rearview camera holder and installing screws
BulletPoint4 : Pls Confirm - This is a universal rear camera bracket, you just need to make sure that the distance between the two screw holes of your rear camera is 0.51in（13mm）, then buy it with confidence
BulletPoint5 : Only Fit US license Plates - This rear view camera bracket can be only applied to US car license plates. Please note that do not install your backup camera upside down, you should test picture before installing
CompatibleDevices : The distance between the two screw holes of your rear camera is 0.51 inches（13mm）
ConnectorType : RCA
ExternallyAssignedProductIdentifier1 : 710917872514
ExternallyAssignedProductIdentifier2 : 0710917872514
GpsrSafetyAttestation : 1
InstallationType : Dashboard Mount,Bracket Mount,Surface Mount
ItemName : Reverse Rear License Plate Bracket Universal Car Dash Cam Mirror Kit Rearview Mount, Installation Holder for Backup View Camera
ItemPackageDimensions_Height : 19.812 centimeters
ItemPackageDimensions_Length : 3.81 centimeters
ItemPackageDimensions_Width : 7.5946 centimeters
ItemTypeKeyword : vehicle-backup-cameras
Manufacturer : Arbutin
ProductDescription :
Arbutin Reverse Rear Camera License Plate Bracket Universal Car Dash Cam Mirror Camera Kit Rearview Camera Mount, Installation Holder for Backup View Camera

This bracket mount is rear view camera accessory, this backup camera license plate mount includes license plate bracket,rearview camera holder,one screwdriver and installing screws

Pls Confirm :
1. This is a universal rear camera bracket, you just need to make sure that the distance between the two screw holes of your rear camera is 0.51ft（13mm）Before Ordering;
2. If you have any questions,just feel free to contact us via email. We are always here to support you.

Package List:
1 x Rear Camera Bracket
1 x Installed Screws
1 x Screwdriver
ProductSiteLaunchDate : 2022-01-22T07:31:49.648Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25172600