Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Size&Package: Surface Treatment: Zinc Plated; Rubber Size: 20 x 15mm/0.79" x 0.59"(D*H); Male Thread Size: M5 x 12mm; Overall Length: 44mm/1.73"; Package: 2 x Isolator Mount, 4 x Serrated Flange Hex Nuts
BulletPoint2 : Material: The shock absorber mount is made of rubber and zinc-plated metal, and the flange nut is made of 201 stainless steel. The rubber and metal are firmly bonded and not easy to fall out. The vibration isolator mount is strong, wear-resistant, corrosion-resistant, not easy to break or rust, the thread is smooth and burr-free, and can be used for a long time
BulletPoint3 : Compact and Stable: Simple geometry supports dynamic performance and stability under lateral (sideways) forces. In equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity
BulletPoint4 : Installation: The rubber bracket comes with flange hex nuts. The installation of the shock absorber bracket is simple, just put the equipment hole in the screw and tighten the nut of the isolator mount. As a damping element for welding machines and other equipment, the damping and noise reduction effects are very obvious. It can protect the normal state of the equipment and ensure a good working environment
BulletPoint5 : Wide Application: Wide use in gasoline generators, air compressors, welding machines, garage doors, flushing pumps, impact pumps, air conditioners, wall fans, washing machines, and generators.
Color : Black,Silver
ItemName : uxcell 2Pcs M5 x 12mm Rubber Mounts, 20 x 15mm Cylindrical Anti Vibration Isolator Studs Shock Absorber Double Studs with Nuts for Car Bobbin Generator Air Compressors
ItemPackageDimensions_Height : 1.5 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : vibration-damping-mounts
Manufacturer : uxcell
ModelName : Rubber Mount
NumberOfItems : 2
PartNumber : a25032400ux4511
ProductDescription : Description:
Material - The shock absorber mount is made of rubber and zinc-plated metal, and the flange nut is made of 201 stainless steel. The rubber and metal are firmly bonded and not easy to fall out. The vibration isolator mount is strong, wear-resistant, corrosion-resistant, not easy to break or rust, the thread is smooth and burr-free, and can be used for a long time.
Compact and Stable - Simple geometry supports dynamic performance and stability under lateral (sideways) forces. In equipment and instruments, it protects the machine from the interference of vibration and has good buffering capacity.
Installation - The rubber bracket comes with flange hex nuts. The installation of the shock absorber bracket is simple, just put the equipment hole in the screw and tighten the nut of the isolator mount. As a damping element for welding machines and other equipment, the damping and noise reduction effects are very obvious. It can protect the normal state of the equipment and ensure a good working environment.
Wide Application - Wide use in gasoline generators, air compressors, welding machines, garage doors, flushing pumps, impact pumps, air conditioners, wall fans, washing machines, and generators.

Specification:
Material: Rubber, Metal, 201 Stainless Steel
Color: Black, Silver
Surface Treatment: Zinc Plated
Rubber Size: 20 x 15mm/0.79" x 0.59"(D*H)
Male Thread Size: M5 x 12mm
Overall Length: 44mm/1.73"
Package: 2 x Isolator Mount, 4 x Serrated Flange Hex Nuts


ProductSiteLaunchDate : 2025-05-12T08:36:50.429Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2