Cart 2 india

Specification
Brand : LJIA
BulletPoint1 : Measurement Ran: Capable of measuring vibrations over a wide ran of frequencies and amplitudes, typically from low to high frequency
BulletPoint2 : Accuracy: Provides precise and reliable measurements of vibration levels, often expressed in terms of acceleration, velocity, or displacement
BulletPoint3 : User Interface: Features a user-friendly interface with buttons or touchscreens for easy operation and navigation through measurement and functions
BulletPoint4 : Durability: Built with rugd construction to withstand harsh environmental conditions and repeated use in industrial
BulletPoint5 : Portable Design: Typically designed to be handheld and portable, allowing easy use in various locations and field conditions
Color : One Color
ExternallyAssignedProductIdentifier : 7509091498640
ItemName : Digital Vibration Meter Tester Gau Testing Equipment Mechanical Vibrometer Measurement with Accuracy±2%,Repeatable Measurements
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vibration-meters
Manufacturer : LJIA
ModelName : 1005005734149251
ModelNumber : 1005005734149251
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 1005005734149251
ProductDescription : Portable Vibrometer Vibration Tester Measurement Analyzer 10Hz~10kHz FFT for Spectrum Analysis

Introduction:
Portable vibration measurer is been used for mechanical vibration measurement, analysis and application. It can transfer time-domain signal to frequency domain signal with its fast Fourier Transform method(FFT), therefore KV-3000 can locate fault point and find out the reason.
Our vibration measurer also equip 2.4 inches TFT color screen, Bluetooth 2.0 wireless communication technique, multi measuring mode and so on. These features can make measurer more suited to the job requirements of the industrial field and provide customers with more convenience. Its performance has reached the contemporary international advanced level of similar measurer.

Working Theory:
Use ICP acceleration transducer, to transfer vibration signal to electrical signal.
To analysis the input signal, customer will obtain the peak acceleration, true RMS, peak coefficient, speed RMS and displacement peak-peak of vibration measurement.
Customer also can print the measure data and spectrum list out.
Application:
Apply to conventional vibration measurement, especially rotate or reciprocating machinery measurement. Not only the acceleration, velocity and displacement of vibration, but also simple fault diagnosis and data printing.
KV-3000 is used on machine building, electricity, metallurgy, vehicle and so on.

Parameter:
A, Measure ran
Acceleration:(0.1~392)m/s2(peak)
Velocity:(0.01~80)cm/s(effective value)
Displacement:(0.001~10)mm(VP-P)
B, Frequency ran
Acceleration:10Hz~10kHz
Velocity:10Hz~1kHz
Displacement:10Hz~500Hz
C, Accuracy
Reference sensitivity:±2%
Amplitude linear relative error:±5%
Relative error of frequency response:±5%
D, Working temperature
-10~40
E, Working humidity
80%RH
F, Display:2.4 inch TFT dot matrix color screen 320*240 pixel(LED back light)ProductSiteLaunchDate : 2024-11-04T02:57:01.366Z
Size : One Size
UnitCount : 1
UnspscCode : 27110000