Cart 2 india

Specification
Brand : Hyuduo
BulletPoint1 : Strong Driving Ability: Alarm module has comparator output, with clean signal, good waveform, strong drive ability, more than 15mA
BulletPoint2 : Convenient : This 2 channel vibration sensor module has fixing bolts holes, and that for easy installation and easy use
BulletPoint3 : Working Principle: The output terminal can be directly connected to the single chip microcomputer, and the high and low level can be detected by the single chip computer, so as to detect whether there is vibration in the environment, and play an alarm function.
BulletPoint4 : Basic Specifications: This 2 way vibration sensor module operates at 3.3V-5V, and the small board PCB size is 3.2 x 1.7cm, Output Form is Digital Switch Output (0 and 1)
BulletPoint5 : Highly Sensitive: The alarm module uses the highly sensitive SW‑420 vibration switch, and uses a wide voltage LM393 comparator. The potentiometer adjusts the sensitivity, the alarm module is in the form of digital switch output
IncludedComponents : No
ItemName : Alarm Sensor Module, 2 Way Vibration Sensor Module, Normally Closed Vibration Sensor, Vibration Switch Alarm Sensor Module SW‑420, Vibration Sensors
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : electronic-component-vibration-sensors
Manufacturer : Hyuduo
ModelName : Hyuduo53da89mw4i
ModelNumber : Hyuduo53da89mw4i
NumberOfItems : 1
PartNumber : Hyuduo53da89mw4i
ProductDescription : 1. Vibration Switch: The alarm module uses the highly sensitive SW‑420 vibration switch, and uses a wide voltage LM393 comparator
2. Strong Drive: Alarm module has comparator output, with clean signal, good waveform, strong drive ability, more than 15mA
3. Sensitivity Adjustment: The potentiometer adjusts the sensitivity, the alarm module is in the form of digital switch output
4. Simple : This 2 channel vibration sensor module has fixing bolts holes , and that for easy installation and easy use
5. Basic Specifications: This 2 way vibration sensor module operates at 3.3V-5V, and the small board PCB size is 3.2 x 1.7cm

Spec:
Item Type: 2 Way Vibration Sensor Module
Material: ABS
Working Voltage: 3.3V-5V
Output Form: Digital Switch Output (0 and 1)
Small Board PCB Size: Approx. 3.2 x 1.7cm / 1.26 x 0.67in
Equipped with fixing bolts holes for easy installation, using a wide voltage LM393 comparator

packing list:
1 x Vibration Sensor Module

Notice:
The output terminal can be directly connected to the single chip microcomputer, and the high and low level can be detected by the single chip computer, so as to detect whether there is vibration in the environment, and play an alarm function.

ProductSiteLaunchDate : 2023-10-08T10:56:34.813Z
UnspscCode : 46171600