Cart 2 india

Specification
Brand : WIOSEN
BulletPoint1 : Model number: SW-420; Max voltage: 12V; Rated thermal current: 20mA
BulletPoint2 : Insulation resistance: 10M ohms; Maximum temperature resistance: 80℃
BulletPoint3 : SW-420 is a single roller type omnidirectional induction trigger switch. This product can detect vibrations and tilts in different directions.
BulletPoint4 : This product is fully sealed and can be waterproof and dustproof. Suitable for activation by induction of vibrations and inclination of small current circuits.
BulletPoint5 : The vibration sensor has been widely used in electric alarms in recent years because it simplifies the complicated structure of buzzer and magnet plus spring used in conventional alarm.
Color : One Color
ConnectivityProtocol : Wi-Fi
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 9141014760779
ItemName : WIOSEN SW-420 Electronic Vibration Sensor Vibration Switch 12V 10M ohm Straight Pin 10pcs
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : electronic-component-vibration-sensors
Manufacturer : WIOSEN
Material : Copper
ModelName : WIOSEN
ModelNumber : WIOSEN
MountingType : Surface Mount
NumberOfItems : 1
OperatingVoltage : 12 volts
PartNumber : WIOSEN
ProductDescription : WIOSEN
Description: 1.SW-420 is a single roller type omnidirectional induction trigger switch. This product can detect vibration and tilt in different directions. 2. This product is fully sealed and can be waterproof and dustproof. Suitable for vibration and tilt induction activation of small current circuits. 3. When there is no vibration and tilt, the product is in the ON/OFF closed state and in the stable state. When there is vibration or tilt, the conductive resistance increases or decreases and a current pulse signal is generated, which activates the circuit. 4. The vibration sensor is a vibration detection element developed for alarms. Because it simplifies the complicated structure of buzzer and magnet plus spring used in traditional alarms, it has been widely used in electric alarms in recent years. Working principle: Normally, the switch of angle is on. When vibrated or moved, the current-carrying roller in the switch will move or vibrate, causing the passing current to be turned off or the resistance value increased to activate the circuit. The characteristic of this type of switch is that it is normally on, and it will be off briefly when it is vibrating, so it has high sensitivity. Through the IC setting, the customer can adjust according to the requirement of product sensitivity. Specification: Product Name: Vibration Switch Model Number: SW-420 Max. Voltage: 12 V Rated thermal current: 20 mA Insulation resistance: 10 M ohm Max. Pin Size: 15mm x 0.6mm Body Dimension: 10mm x 5.5mm Package Content: 10 x Vibration Switches
ProductSiteLaunchDate : 2023-11-11T00:45:00.043Z
Size : One Size
SwitchType : Temperature Switch
UnitCount : 1
UnspscCode : 39122200