Cart 2 india

Specification
Brand : Sanyipace
BulletPoint1 : Visual Operation – Unlike traditional locators, the innovative Sanyipacec 512Hz receiver offers a clear on-screen display of battery level, far/near mode, signal strength, and volume. All functions are easily accessible with buttons, boosting your work efficiency!
BulletPoint2 : Compatible not only with Sanyipace brand sewer cameras but also with any plumbing inspection device equipped with a 512Hz transmitter, quickly pinpointing problem areas such as blockages, bulges, cracks, crushes, or breaks in pipes that require repair or replacement
BulletPoint3 : Easy to Use: The locator offers two modes: long-range mode (up to 16.5FT/5M) and short-range mode (up to 3.3FT/1M). First, install the antenna and power on the locator, set the sensitivity to maximum, and scan the area in Far Mode. Gradually move toward the strongest signal, reduce sensitivity to a minimum, and switch to Near Mode. Fine-tune sensitivity in Near Mode to pinpoint the transmitter's exact location when the signal is strongest.
BulletPoint4 : Sanyipace team provides 24/7 after-sales service and lifetime technical support. Our sewer cameras and locators are ideal for plumbers, construction workers, and homeowners. It can widely be used in sewage pipe inspection, underground water pipe inspection, oil and gas pipeline inspection, plumbing inspection, HVAC duct pipeline inspection, underground exploration, home pipe blockage inspection, etc.
BulletPoint5 : NOT including the 512 Hz transmitter. If you need one, please contact our support team via Amazon or our official website at [sanyipace.com]
Color : Grey [Visible]
ExternallyAssignedProductIdentifier : 4640373354773
Hazmat1 : LITHIUM ION BATTERIES CONTAINED IN EQUIPMENT
Hazmat10 : DE_SmallLithiumIonBatteryInEquipment
Hazmat11 : EG_SmallLithiumIonBatteryInEquipment
Hazmat12 : ES_SmallLithiumIonBatteryInEquipment
Hazmat13 : FR_SmallLithiumIonBatteryInEquipment
Hazmat14 : GB_SmallLithiumIonBatteryInEquipment
Hazmat15 : IE_SmallLithiumIonBatteryInEquipment
Hazmat16 : IN_SmallLithiumIonBatteryInEquipment
Hazmat17 : IT_SmallLithiumIonBatteryInEquipment
Hazmat18 : JP_SmallLithiumIonBatteryInEquipment
Hazmat19 : MX_SmallLithiumIonBatteryInEquipment
Hazmat2 : UN3481
Hazmat20 : NL_SmallLithiumIonBatteryInEquipment
Hazmat21 : PL_SmallLithiumIonBatteryInEquipment
Hazmat22 : SA_SmallLithiumIonBatteryInEquipment
Hazmat23 : SE_SmallLithiumIonBatteryInEquipment
Hazmat24 : SG_SmallLithiumIonBatteryInEquipment
Hazmat25 : TR_SmallLithiumIonBatteryInEquipment
Hazmat26 : US_SmallLithiumIonBatteryInEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryInEquipment
Hazmat28 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryInEquipment
Hazmat5 : AU_SmallLithiumIonBatteryInEquipment
Hazmat6 : BE_SmallLithiumIonBatteryInEquipment
Hazmat7 : BR_SmallLithiumIonBatteryInEquipment
Hazmat8 : CA_SmallLithiumIonBatteryInEquipment
Hazmat9 : CN_SmallLithiumIonBatteryInEquipment
IncludedComponents : 512Hz locator
ItemName : Sanyipace Pipe Locator 512Hz Receiver Locating Wand for Sewer Camera, Higher-Precision Plumbing Drain Camera Detector Tester Tool for Underground Exploration (Not Included Transmitter)
ItemPackageDimensions_Height : 17.32 inches
ItemPackageDimensions_Length : 9.45 inches
ItemPackageDimensions_Width : 5.71 inches
ItemPackageQuantity : 1
ItemTypeKeyword : borescopes
Manufacturer : Sanyipace
Material : Acrylonitrile Butadiene Styrene (ABS)
MeasurementAccuracy : 3ft / 3m
ModelName : Marhynchussy40pvhond
ModelNumber : CONE-3/4
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : S
PowerSourceType : =
ProductDescription :

How to Use The Locator

Survey the area:

① Install the antenna and turn on the locator.

② Press the "SEN+" button to adjust the sensitivity to the maximum value (7), you will hear the noise from the speaker (you can also adjust or turn off the volume by pressing the "SOUND" button), and set the mode to "Far".

③Hold the receiver and walk around the area where you want to estimate the location, slowly sweeping the receiver back and forth.

④ When the correct direction of the transmitter is detected, the signal will become stronger, otherwise, it will become weaker.

⑤ When the signal display is full, slowly reduce the sensitivity by pressing the "SEN-" button.

⑥Keep the receiver perpendicular to the ground and slowly move closer to the transmitter. When the sensitivity is adjusted to the minimum value (1) and the signal display is still full, set the mode to "Near".

Detector searches for specific locations:

① Use the above steps to find the approximate location of the transmitter and switch the mode to "near".

② Press the "SEN+" button to adjust the sensitivity to the maximum value (7), hold the receiver, and slowly sweep the receiver back and forth within the approximate location of the transmitter. The closer you get to the exact location of the transmitter, the stronger the signal will be, otherwise, it will become weaker.

③ When the signal is displayed as the strongest, slowly lower the sensitivity by pressing the "SEN-" button. When the sensitivity is adjusted to the minimum value (1) and the signal display becomes the strongest, you can determine that this position is the specific location of the transmitter.

Technical Parameters

Screen Size: 3.5 inch

Screen operation: press buttons

Receiver Frequency: 512Hz

Power consumption: <3W

Distance: about 5M/16.5FT

Battery: 3.7V 3000mAh built-in lithium battery

Charger: 5V0.5A

Charger time: about 6 hours

Battery Indicator: 5 bar

Battery working time: about 10 hours

Signal strength: 6 gear

Sensitivity Adjustable: Support

Speaker: Support

Detect Mode : Far/ Near

Packing List

1* Plastic Box

1* Locator

1* Instruction Manual

1* Fastener

1* Charger

1* USB-C Data Cable

1* Earphones

ProductSiteLaunchDate : 2024-11-29T03:57:30.231Z
Style : Pocket Digital Stroboscope
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41113700