Cart 2 india

Specification
Brand : EZAUTO WRAP
BulletPoint1 : Made with an automotive-cast vinyl. Protects your paint from scratches and wear. Can be easily re-positioned and stretched for exact fitment and is soft enough to conform to all edges/contours/shapes. Creases and air bubbles can be removed by applying heat and using a squeegee.
BulletPoint2 : We provide a free EZAUTOWRAP tool gift set. We Limited 1 Set of Tool Kit for each buyer ONLY regardless of quantity purchase.
BulletPoint3 : Will not harm painted surfaces. Can be easily repositioned during installation and does not leave adhesive residue behind
BulletPoint4 : This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are recommended by 3M vinyl wrap training class, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films.
BulletPoint5 : Note: Chevy emblem with textured surface will need additional adhesive or glue to stick properly.
Color : Rose Gold
CompatibleWithVehicleType : Car
CompatibleWithVehicleType1 : Van
CompatibleWithVehicleType2 : ATV
CompatibleWithVehicleType3 : Truck
CompatibleWithVehicleType4 : Car
CompatibleWithVehicleType5 : SUV
CompatibleWithVehicleType6 : Snowmobile
ExteriorFinish : Chrome
ExternallyAssignedProductIdentifier1 : 0628856176061
ExternallyAssignedProductIdentifier2 : 628856176061
ItemName : Free Tool Kit 2Pcs 5"x10" Compatible with Chevy Emblem Bowtie Satin Chrome Rose Gold Copper Vinyl Wrap Sticker Decal Film Sheet
ItemPackageDimensions_Height : 25.4 centimeters
ItemPackageDimensions_Length : 0.762 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-vinyl-wraps
Manufacturer : EZAUTOWRAP
Material : Vinyl
Material1 : Vinyl
Material2 : Wrap
ModelName : 3D Carbon Fiber
ModelNumber : 3D CF-RED-006
PartNumber : EZ-VAR-All-SC-ROSE-GOLD-2x-5"X10"
ProductDescription :

Free Tool Kit Requirement
Limited 1 Set of Tool Kit for each eBay Account ONLY regardless of quantity purchase

• Water resistant and weather proof.
• Flexible and Stretchable for concave area.
• Low cost to change the look of your vehicles.
• Easy installation with dry application method.
• Heat gun or household blow dryer for shaping is required.
• Low - medium tack self adhesive .
• Easy to fit in most tight spots or corners (3M primer 94 is requireed for non sticky surfaces, curves and corners)
• Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day.
• Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage.
• Always pre-test vinyl installation on vehicles.
• Due to different monitors/calibrations, colors may vary slightly from the pictures.
• Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll.
• For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping.
  
  Package include: 2Pcs 5"x10" Vinyl (Not Precut)
  
  Note: Chevy emblem with textured surface will need additional adhesive or glue to stick properly.

ProductSiteLaunchDate : 2024-10-02T14:58:48.833Z
Size : 2pcs 5"x10"
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 55121607