Cart 2 india

Specification
Brand : VViViD
BulletPoint1 : Extremely realistic metallic finish with a matte/satin finish (not brushed)
BulletPoint2 : Features all of VViViD's film technology including air-release for a bubble free finish, high abrasion resistance
BulletPoint3 : ZERO STRESS Repositionable adhesive for the fastest and easiest install ever in a film. Will not feel sticky until film is slightly heated and squeegeed into place! Most competitor films are extremely sticky and hard to reposition or lift if a mistake is made.
BulletPoint4 : 10 year life expectancy. Easy to clean. Can be used on appliances, fridges, ranges, cabinet faces, counters, craft and more!
BulletPoint5 : Guaranteed to be the best peel & stick metal film on the market.
Color : Chrome
CompatibleWithVehicleType : Car
CompatibleWithVehicleType1 : Car
CompatibleWithVehicleType2 : Van
CompatibleWithVehicleType3 : Motorcycle
CompatibleWithVehicleType4 : Bus
ExteriorFinish : Chrome
ExteriorFinish1 : Alloy Steel
ExteriorFinish2 : Chrome
ExternallyAssignedProductIdentifier1 : 8016408162501
ExternallyAssignedProductIdentifier2 : 08016408162501
GpsrSafetyAttestation : 1
ItemName : VViViD Architectural Stainless Steel Satin Finish Chrome Color Film (36" x 60")
ItemPackageDimensions_Height : 91.44 centimeters
ItemPackageDimensions_Length : 3.81 centimeters
ItemPackageDimensions_Width : 3.81 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-vinyl-wraps
Manufacturer : VViViD
Material : stainless steel
ModelNumber : arctctrlstainless
NumberOfItems : 1
PartNumber : arctctrlstainless
ProductDescription : This extremely realistic satin stainless steel film is great for small and large appliances! Enjoy perfect finishes thanks to VViViD's air-release technology and ease of application. STEP1. Measure area to be wrapped and cut the appropriate size leaving a couple inches of excess on all sides. Clean the surface of all contaminants before wrapping STEP2. Peel the first couple inches of liner off the film exposing the adhesive on both top corners. Position the film on the target surface by sticking the exposed adhesive to the top of the project. STEP3. Gently remove the paper liner off the film. IF you get wrinkles, simply lift the film and re-adjust as needed. Use a squeegee to remove any trapped air behind the film starting from the middle outwards. STEP4. Use a heat gun or hot hair dryer and heat edges or corners and press material into place of a clean finish. Using a hot hair dryer or heat gun will also expose any areas where you may have forgotten to remove air. Simply press the bubble and it should disappear! If not use a pin to pop the bubble.
Size : 36" x 60"
StreetDate : 2019-01-10T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
TeamName : Quattroerre
UnspscCode : 55121607