Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : X AUTOHAUX
BulletPoint1 : Specification: Color: Red. Size: 150x30cm / 59"x12"(L*W).
BulletPoint10 : Feature: Performance Part
BulletPoint2 : Application: Universal for most car headlight taillight fog light sider marker lights.
BulletPoint3 : Material: Air Tint Vinyl, is scratch, grime, water and dirt resistant, can be cut to the necessary shape and has a good translucency. 3 Layers, From inside to outside: Application Side Protective layer, Vinyl Tint Wrap, Wrap Outer Protective layer.
BulletPoint4 : Package Included: 1x Vinyl Air Tint Wrap Film Protection Roll.
BulletPoint5 : Installation instructions: Cut according to your light and allow 5cm larger. Clean the light surface. Start from a small corner then stretch. You may add a little water as well. Use a squeegee to smooth and remove air. Use a drier to heat it then stretch. Also, use the squeegee to help. Use a small tool to cut the useless area along the light edge. To take off, please remember to turn off the light and wait until it's at a moderate temperature, not too cold or too hot.
BulletPoint6 : Color:Black
BulletPoint7 : Installation Instruction:Not Included
BulletPoint8 : Finish:Unfinished
BulletPoint9 : Type:Window
Color : Red
CompatibleWithVehicleType : Car
ExternallyAssignedProductIdentifier : 5056428600327
FitType : Vehicle Specific Fit
IncludedComponents : Shown in the picture
ItemName : X AUTOHAUX Vinyl Air Tint Wrap Film Protection Roll 30x150cm 12x59 Inch for Car Headlight Taillight Fog Light Sider Marker Light Red
ItemPackageDimensions_Height : 31.4 centimeters
ItemPackageDimensions_Length : 2.9 centimeters
ItemPackageDimensions_Width : 12.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-vinyl-wraps
Manufacturer : X AUTOHAUX
Material : Vinyl
ModelName : automobile-armrest-covers
ModelNumber : a22011300ux0041
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : a22011300ux0041
ProductDescription : Description:
Vinyl tint wrap is designed to fit and stretch around difficult surfaces.
Universal for most car headlight taillight fog light sider marker lights.
It is scratch, grime, water and dirt resistant.
Very easy to use. When you remove it, it won't damage your lights and won't leave any residue behind.
Layers: 3 Layers. From inside to outside: Application Side Protective layer, Vinyl Tint Wrap, Wrap Outer Protective layer.

Specification:
Color: Red
Material: Vinyl
Type: Vinyl Tint Wrap
Size: 150x30cm / 59"x12"(L*W)

Installation instructions:
Cut: Cut it according to your light and allow 5cm larger.
Clean: Clean the surface of your light with a towel.
Paste: Take off the inner protective layer corner and start from a small area, then stretch to cover a larger area. You may add a little water as well. Use a squeegee to smooth and remove air.
For Curved Surface: Use a drier to heat it then stretch. Also, use the squeegee to help.
Finish: Use a small tool to cut the useless area along the light edge.
To Take Off: Please remember to turn off the light and wait until it's at a moderate temperature, not too cold or too hot.

Package Included:
1 x Vinyl Air Tint Wrap Film Protection Roll


ProductSiteLaunchDate : 2025-06-16T10:24:44.681Z
Size : 12 x 59 Inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 12 Months