Cart 2 india

Specification
Brand : Abwan
BulletPoint1 : RC absorption circuit module used on protecting the relay or thyristor because it can avoid damage that from inductive electromotive force generated by the inductive load when on or off. Preventing electromagnetic interference and increasing the anti-jamming capability of the microcontroller.
BulletPoint2 : RC absorption circuit,absorb induced electromotive force that from inductive load. To provide anti-interference ability of the circuit.
BulletPoint3 : With varistor, to prevent excessive fluctuations in voltage or current is too large and resulting in relay contact adhesion.
BulletPoint4 : Adopt crimp terminals that make wiring become more convenient.
BulletPoint5 : Instructions for use: This module is suitable for circuits containing inductive loads and switching devices such as relays and thyristors. When used, the two connectors of the module connect to two contacts of the relay, or parallel with the thyristor, to avoid induced electromotive force damage the relay or thyristor.
CircuitBreakerType : Standard
Color : White
ConnectorType : Crimp
CurrentRating : 63 amps
ExternallyAssignedProductIdentifier : 9469983941167
ExternallyAssignedProductIdentifier1 : 753874401847
ExternallyAssignedProductIdentifier2 : 0753874401847
FinishType : Finish
IncludedComponents : inc
ItemName : Abwan Relay Switch Protection Device, RC Absorption/Snubber Circuit Module Relay Contact Protection Resistance Circuit/electromagnetic Anti-Interference Module
ItemPackageDimensions_Height : 9.1 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 7.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : voltage-monitoring-relays
Manufacturer : Abwan
Material : Polycarbonate
MaximumSwitchingCurrent : 63 amps
MaximumSwitchingVoltage : 2.77 volts
MeasurementSystem : Imperial
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
MeasurementType : Voltmeter
ModelNumber : SVP-916
MountingType : Panel Mount
NumberOfItems : 4
NumberOfPoles : 1
NumberOfTerminals : 2
OperationMode : Automatic
PartNumber : GT0XYOHvC1MdN6VA
PowerSourceType : PowerSource
ProductDescription : Introduction of Relay Protection Circuit Module? RC absorption circuit module used on protecting the relay or thyristor because it can avoid damage that from inductive electromotive force generated by the inductive load when on or off. Preventing electromagnetic interference and increasing the anti-jamming capability of the microcontroller. For AC or DC 5 ~ 400V inductive load (less than 1000W), protection relay contacts or thyristor. With varistor, to prevent excessive fluctuations in voltage or current is too large and resulting in relay contact adhesion. RC absorption circuit,absorb induced electromotive force that from inductive load. To provide anti-interference ability of the circuit. Adopt crimp terminals that make wiring become more convenient. Instructions for use: This module is suitable for circuits containing inductive loads and switching devices such as relays and thyristors. When used, the two connectors of the module connect to two contacts of the relay, or parallel with the thyristor, to avoid induced electromotive force damage the relay or thyristor. Specification: Dimensions: 3.1x1.3cm/1.22x0.51inch Quantity: 4 Pc Note: No retail package. Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 4 x RC Circuit Module
ProductSiteLaunchDate : 2021-08-30T17:31:53.838Z
Size : standard
SkipOffer : 1
SpecificationMet : Electromagnetic
Style : Digital
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39122300
Voltage : 1 volts
Wattage : 2 watts