Cart 2 india

Specification
Brand : eletechsup
BulletPoint1 : 2 Channel DC 12V Bistable Self-locking Relay Module
BulletPoint2 : Working voltage: DC 12V
BulletPoint3 : Standby current: 0.2mA
BulletPoint4 : Trigger mode: Low pulse trigger
BulletPoint5 : Load current: AC 250V / 10A, DC 30V / 10A
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 0749085302868
ExternallyAssignedProductIdentifier2 : 749085302868
IncludedComponents : Module
ItemName : Eletechsup 12V 2CH Flip-Flop Bistable Self-Locking Relay Module Trigger Switch Board (1)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : voltage-monitoring-relays
Manufacturer : eletechsup
Material : Copper
MaximumSwitchingCurrent : 10 amps
MaximumSwitchingVoltage : 250 volts
MeasurementSystem : Metric
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
ModelNumber : SL25B02
MountingType : din_rail
NumberOfItems : 1
OperationMode : Automatic
PartNumber : SL25B02
ProductDescription :

Product Name:12V 2CH Flip-Flop Bistable Self-locking Relay Module Trigger Switch Board

Packing list:

2 Channel DC 12V Bistable Self-locking Relay Module

Description:

2 Channel DC 12V Self-locking Relay Module(version 3) :

Working voltage: DC 12V

Working current: 1 relay 70MA;2 relay 140MA;

Standby current: 0.2mA

Load current: AC 250V / 10A, DC 30V / 10A

Trigger mode: Low pulse trigger

Size: 36mm * 32.3mm * 18.5mm (L * W * H)

Weight: 24.5 g

USE 1:

By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on.

USE 2:

By default, the relay is release, MCU output low-pulse(0.3-1seconds), the relay pull, low-pulse again, the relay release, the third low-pulse, the relay pull, and so on.

    

Module interface:

1. V: positive power supply (VCC)

2. G: negative power supply (GND)

3. T (T1/T2/T3/T4): Low pulse trigger

Relay outputs:

1. NO: normally open relay interface

2. COM: Common Interface Relays

3. NC: normally closed relay interface

USE : By default, the relay is release, press the trigger button, the relay pull, press again, the relay release, the third press, the relay pull, and so on

Typical applications:

Automotive electronics

Motor/PLC/LED

Smart Home/Home automation

Emergency lighting

MCU development board

Toy car

for UNO MEGA2560 raspberry pi  

diy electronic kit

ProductSiteLaunchDate : 2018-08-15T07:00:00.000Z
SpecificationMet : Ma
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39122300
Wattage : 1.7 watts