Cart 2 india

Specification
AgeRangeDescription : adult
Brand : MECCANIXITY
BulletPoint : Voltage Testers
BulletPoint1 : It is suitable for automotive/electric vehicle/motorcycle battery monitoring or voltage and current measurement of other electrical products
BulletPoint2 : Voltage measurement range: 0.0V-100V;Current measurement range: 0-10A;Voltage supply range: DC4V-30.0V;Voltage measurement accuracy: ±1%;Current measurement accuracy: ±1%;Working current：<20mA;Refresh rate: about 300mS / times;Display:0.28 inch LED Tube;Display color：Red+Blue;Overall dimensions: 48mm x 28.5mm x 21.5mm;Cutting size : 46mm x 27mm;Working Temperature:-10℃～+65℃
BulletPoint3 : High stability;High precision;Easy to operate;Reverse Polarity Protection: The tester won't broken if reverse polarity is applied;Small size
BulletPoint4 : Connect the wires and install the unit in a suitable place
BulletPoint5 : 1.The power supply range of this meter is 4~30V (it will be broken if it exceeds the range), and the measurement range is 0~100V;2.Make sure the thick black wire is connected to the negative side of the battery and the thick red wire is connected to the negative side of the load;3.If it is directly powered or the independent power supply is grounded with the equipment power supply, just disconnect the thin black wire;
Color : Red Blue
ExternallyAssignedProductIdentifier : 7320555683262
ItemName : MECCANIXITY Digital Voltmeter Ammeter Volt Ampere Meter DC 100V 10A 3 Bits Red Blue Dual LED Display Panel Voltage Current Tester for Electrical Products 2Pcs
ItemPackageDimensions_Height : 1.06 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 2
ItemTypeKeyword : voltage-testers
Manufacturer : MECCANIXITY
MinimumOperatingVoltage : 4 volts_of_direct_current
ModelName : BSQGUEWD
ModelNumber : BSQGUEWD
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : mea240411ee001126
ProductDescription : What is this?
It is suitable for automotive/electric vehicle/motorcycle battery monitoring or voltage and current measurement of other electrical products.

What will I get?
Voltage measurement range: 0.0V-100V
Current measurement range: 0-10A
Voltage supply range: DC4V-30.0V
Voltage measurement accuracy: ±1%
Current measurement accuracy: ±1%
Working current：<20mA
Refresh rate: about 300mS / times
Display:0.28 inch LED Tube
Display color：Red+Blue
Overall dimensions: 48mm x 28.5mm x 21.5mm
Cutting size : 46mm x 27mm
Working Temperature:-10℃～+65℃

Are there any advantages of the product?
High stability;High precision;Easy to operate;Reverse Polarity Protection: The tester won't broken if reverse polarity is applied;Small size

How to use it?
Connect the wires and install the unit in a suitable place

What should I notice?
1.The power supply range of this meter is 4~30V (it will be broken if it exceeds the range), and the measurement range is 0~100V.
2.Make sure the thick black wire is connected to the negative side of the battery and the thick red wire is connected to the negative side of the load.
3.If it is directly powered or the independent power supply is grounded with the equipment power supply, just disconnect the thin black wire.
4.All rectified alternating current must be filtered by an electrolytic capacitor of more than 1000uF before powering the meter.
ProductSiteLaunchDate : 2024-11-12T11:42:24.537Z
Size : Inches
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41113600
UpperTemperatureRating : 65 degrees_celsius