Cart 2 india

Specification
Brand : FireHoseDirect
BulletPoint1 : Made in the USA - Used by the US Forestry Service
BulletPoint2 : Hose Size - 1 inch (Inside Diameter)
BulletPoint3 : Hose Length - 50 feet (Approximately)
BulletPoint4 : Male Coupling - Aluminum 1 inch NPSH
BulletPoint5 : Swivel Female Coupling - Aluminum 1 inch NPSH with Gasket
Color : White
ExternallyAssignedProductIdentifier1 : 0680306822928
ExternallyAssignedProductIdentifier2 : 680306822928
ItemLength : 50 feet
ItemName : Fire Hose - 1" x 50' Lay Flat Water Hose - Made in the USA - White Forestry Firefighter Hose - Aluminum NPSH Couplings
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 14 inches
ItemPackageDimensions_Width : 14 inches
ItemTypeKeyword : water-hoses
Manufacturer : FireHoseDirect
Material1 : Polyester
Material2 : Polyurethane (PU)
MaximumPressure : 900 pounds_per_square_inch
PartNumber : 10F650P
ProductDescription :

• The Female Coupling Will Only Connect to a Male 1 NPT or NPSH
• Compatible Nozzle - 1 inch NPSH only
• Hose Type - Polyester Single Jacket
• Color - White
• Liner - Polyurethane
• Approximate Width Laying Flat - 1 3/4 inches
• Service Pressure - 300 PSI
• Proof Test Pressure - 600 PSI
• Burst Test Pressure - 900 PSI

Our domestic hoses are made by the largest fire hose manufacturer in the United States. They are manufactured to meet or exceed NFPA standards used by United States Forestry Service (USFS).

Our 1 inch "Made in the USA" white forestry fire hose is manufactured to meet and exceed all performance requirements of NFPA 1961 and USDA-US Forestry Service Specification 5100-187 Type 1. The polyurethane lining delivers more water at higher pressures. Lightweight, easy to handle and fitted with threaded couplings.

Note: Our USA made Type I Forestry Hose is designed to be ultra lightweight for maximum portability when fighting wildland fires. The TPU lining allows for low friction loss and enables it to pack extremely well. For increased durability see our yellow Type II Forestry Hose that features a rubber inner liner and an outer yellow polymer coating for maximum durability in a wildland fire hose.

Applications

• Forest firefighting
• Brush firefighting
• Wildland firefighting
• Residential Use

Test Ratings (Water Only With Expansion Ring Couplings)

• Service Pressure (A 3-minute hydrostatic test conducted by users on in-service hose to determine suitability for continued service)
• Proof Test Pressure (A pressure equal to a least two times the service test pressure)
• PSI Burst Test Pressure

ProductSiteLaunchDate : 2021-08-18T12:32:26.515Z
Size : 1" x 50'
UnspscCode : 40142000