HOW TO USE
1.Collect Your Water sample
Wash your hands before starting. Open the foil pouch at the tear notch and remover all contents. The desiccant packet can be discarded. From the cold water tap , freshly draw a sample of water into a clean cup.
2.Prepare Your Water Sample for Testing
Pick up the dropper pipette. While tightly squeezing the bulb at the end of the pipette, dip the open end into your water sample. Release the bulb to extract a portion of the water sample intothe pipette.
Lift the pipette out of the water and hover it over the opening ot the small vial in upright position. Tightly squeeze the bulb again, transfeming the full pipette of water into the small vial. Use only one pipette -full of water.
3.Perform Test
With one hand, gently swirl the vial for severa seconds, then place the vial on aflat surface. Place the test trip into the vial with the arrows pointing. Allow the vial to sit undisturbed for 10 minutes onthe flat surface.
4.Read Test Results
Remove the test strip trom the vialand place on a flat surface with the arrows pointing to the left. Blue lines that indicate your test results will have now appeared on the test strip.
PACKAGING:
Option 1: Neutral packing
Option 2: Wancheng brand
Option 3: Neutral packing + your own labels
Option 4:Customized design packing