Cart 2 india

Specification
Brand : Set it Fast
BulletPoint1 : Chamfered top designed to prevent mushrooming during installation
BulletPoint2 : Qualified for static and seismic loading conditions (seismic design categories A through F)
BulletPoint3 : Suitable for horizontal, vertical and overhead applications
BulletPoint4 : Tested per ACI355.2 and AC193
BulletPoint5 : Size: 5/8 in. x 4-1/2 in.
Color : Steel
CompatibleGrooveDiameter : 0.625 inches
CustomerPackageType : Standard Packaging
DriveSystem : Screw
ExteriorFinish : Zinc
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Zinc
ExternallyAssignedProductIdentifier1 : 0749273247575
ExternallyAssignedProductIdentifier2 : 749273247575
ExternallyAssignedProductIdentifier3 : 0785577164736
ExternallyAssignedProductIdentifier4 : 0707392170921
ExternallyAssignedProductIdentifier5 : 00707392170921
FinishType : Zinc
GpsrSafetyAttestation : 1
GradeRating : Industrial
IncludedComponents : Anchors(50)^Hex Nuts(50)^Flat Washers(50)
ItemDisplayDimensions_Height : 0.62 inches
ItemDisplayDimensions_Length : 4.5 inches
ItemDisplayDimensions_Width : 0.62 inches
ItemDisplayWeight : 8.2 pounds
ItemName : 3/8" Wedge Anchor Setting Tool For SDS Hammer Drills
ItemPackageDimensions_Height : 9.144 centimeters
ItemPackageDimensions_Length : 9.906 centimeters
ItemPackageDimensions_Width : 20.066 centimeters
ItemPackageQuantity : 1
ItemShape : Wedge
ItemTypeKeyword : wedge-anchors
Manufacturer : Simpson Strong-Tie
ManufacturerGrade : Grade 1
Material : Carbon Steel
Material1 : Carbon Steel
Material2 : Zinc
Material3 : stainless_steel
MeasurementSystem : Imperial
MetalType : Carbon Steel
ModelNumber : STB2-62412
NumberOfItems : 1
NumberOfPieces : 20
PackageLevel : unit
PartNumber : SETST9003
ProductDescription :

Applications
The 1/2" x 5-1/2" Trubolt Wedge Anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a dry environment.

Hole Diameter/Bit Diameter



The anchor requires a 1/2" hole to be drilled in the base material (concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the 1/2" x 5-1/2" Trubolt Wedge Anchor is 1/2".

Length Anchor
The length of the anchor is 5-1/2", and is measured as an overall length of the anchor from end to end.

Thread Type
The threads on the anchor are national coarse threads that measures 1/2" with 13 threads per inch, commonly referred to as 1/2"-13.

ProductSiteLaunchDate : 2012-06-12T16:43:43.200Z
Size : One Size
SkipOffer : 1
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword1 : consumer-audience
TargetAudienceKeyword2 : unisex-adult
TargetAudienceKeyword3 : adults
TargetAudienceKeyword4 : professional-audience
TargetAudienceKeyword5 : professional
UnitCount : 1
UnspscCode : 27110000