Cart 2 india

Specification
Brand : Conquest Fasteners
BulletPoint1 : [DIMENSIONS] Diameter: 1/2" | Length: 3-3/4" | Thread Type: Coarse (standard) | Thread Length: 2-1/8" | Quantity: 25 Pieces | Material: Type 316 Stainless Steel
BulletPoint2 : [CORROSION RESISTANT] Highest grade 100% 316 Stainless Steel provides highest form of corrosion resistance. Ideal for any environment (including marine and saltwater applications)
BulletPoint3 : [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures
BulletPoint4 : [DESIGN] Chamfered top designed to prevent mushrooming during installation
BulletPoint5 : [INSTALLATION] Hole size is nominal diameter of anchor size
BulletPoint6 : Minimum Tensile Strength: 60,000 PSI
BulletPoint7 : Coating Thickness: for sizes 3/8“ & under : 0.0017” (43 microns) | for sizes over 3/8“ : 0.0020” (50 microns)
BulletPoint8 : Specifications Met: ASTM F2329/F2329M or ASTM A153/A153M
BulletPoint9 : RoHS Compliant
Color : Grey
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 014973351687
ExternallyAssignedProductIdentifier2 : 0014973351687
FinishType : Zinc
GradeRating : Grade A
ItemDisplayDimensions_Length : 3.75 inches
ItemName : Conquest 1/2" x 3-3/4" Type 316 Stainless Steel Wedge Anchors (Box of 25) Heavy Duty Fastener for Concrete
ItemPackageDimensions_Height : 18.4 centimeters
ItemPackageDimensions_Length : 7.7 centimeters
ItemPackageDimensions_Width : 13.1 centimeters
ItemPackageQuantity : 25
ItemShape : Car,wedge
ItemTypeKeyword : wedge-anchors
Manufacturer : Conquest Fasteners
ManufacturerGrade : Grade 316
Material : Stainless Steel
MetalType : Stainless Steel
ModelNumber : CWA12-334SS6
NumberOfItems : 25
NumberOfPieces : 25
PartNumber : CWA12-334SS6
ProductDescription : Conquest 316 stainless wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These stainless steel anchors are commonly used for installing racking, machinery, car lifts and all sorts of other fixtures where maximum corrosion resistance is required. All Conquest wedge anchors are marked on the top of the anchor body for easy length identification once installed. The 316 stainless steel provides the greatest corrosion resistance for the most severe corrosive environments such as ocean front installations. Installation: 1. Drill a hole in the base material using a carbide drill bit the same dimeter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth and blow it clean using compressed air. Alternatively, drill the hole deep enough to accommodate the embedment depth and the dust from drilling. 2. Assemble the anchor with nut and washer so the top of the nut is flush with the top of the anchor. Place the anchor in the fixture and drive it into the hole until the washer and nut are tight against the fixture. 3. Tighten to the required installation torque. Warning: Do not use an impact wrench to set or tighten anchors Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor’s load capacity Torque Specification - 40 ft /lbs
ProductSiteLaunchDate : 2021-12-16T10:31:46.272Z
Size : 1/2" x 3-3/4"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 50
UnspscCode : 31161500