Cart 2 india

Specification
Brand : ITW Ramset/Red Head
BulletPoint1 : Size: 3/8-inch, length: 2-1/4-inch, quantity: 50
BulletPoint2 : Durable
BulletPoint3 : Easy to set
BulletPoint4 : Use to connect wood frame to concrete
BulletPoint5 : Anchor Diameter Equals Hole Diameter
Color : Red
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier1 : 662520020045
ExternallyAssignedProductIdentifier2 : 0662520020045
ExternallyAssignedProductIdentifier3 : 00662520020045
ItemName : Red Head WS-3822 Trubolt Carbon Steel Wedge 3/8-Inch by 2-1/4-Inch Anchor (50 per Box)
ItemPackageDimensions_Height : 6.86 centimeters
ItemPackageDimensions_Length : 19.05 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemShape : Block,wedge
ItemTypeKeyword : wedge-anchors
Manufacturer : ITW Ramset/Red Head
Material : Carbon Steel Zinc Plated
Material1 : Carbon Steel
Material2 : zinc plated
Material3 : Stainless Steel
MaximumShearStrength : 12504
MeasurementSystem : Imperial
MetalType : Stainless Steel
ModelNumber : WS-3822
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : IRHWS3822
ProductDescription : Applications
The anchor is made from Carbon Steel, and is Zinc Plated and meets the Buy America Act (BAA). This anchor is designed for use in Concrete only, and should never be used in block or brick base material.

Environment
The anchor is designed for use in a Dry environment.

Hole Diameter/Bit Diameter
The anchor requires a 3/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Diameter of Anchor
The diameter of the anchor is 3/4".

Length Anchor
The length of the anchor is 12"

Thread Length
The length of the threads on the anchor is 2-1/4" in length.

Minimum Embedment
The minimum anchor embedment into the concrete is 3-1/4". Therefore, the anchor must be installed so that a minimum of 3-1/4" of the anchor is embedded into the concrete.

Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 8". This will ensure that the minimum embedment of 3-1/4" will be met.

Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/4" diameter anchor requires the hole in the fixture to be 1".

Spacing between Anchors
Each anchor must be spaced a minimum distance of 7-1/2" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 3-3/4" from an unsupported edge of the concrete.
ProductSiteLaunchDate : 2009-11-25T00:00:01-00:00
Size : One Size
UnspscCode : 31161500