Cart 2 india

Specification
Brand : Williams
BulletPoint1 : 5-Inch long
BulletPoint2 : Overall width of 1-Inch
BulletPoint3 : Thick end is 1/2-Inch
BulletPoint4 : Used for setting up work on planers, shapers, milling machines and other similar applications
BulletPoint5 : Made in USA
Color : Silver
CompatibleFastenerDescription : 0.5 inches
CompatibleGrooveDiameter : 0.25 inches
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier : 8431271499088
ExternallyAssignedProductIdentifier1 : 662459306715
ExternallyAssignedProductIdentifier2 : 0662459306715
ExternallyAssignedProductIdentifier3 : 00662459306715
FinishType : Zinc
GpsrSafetyAttestation : 1
GradeRating : Grade B7
ItemHardness : B7 (Rockwell Hardness Scale)
ItemLength : 5 inches
ItemName : Williams WG-5 5-Inch Set Up Wedge
ItemPackageDimensions_Height : 13.4874 centimeters
ItemPackageDimensions_Length : 1.2954 centimeters
ItemPackageDimensions_Width : 3.9878 centimeters
ItemPackageQuantity : 1
ItemShape : Block,hand,wedge
ItemTypeKeyword : wedge-anchors
Manufacturer : SnapOn
ManufacturerGrade : Grade 2
Material : Carbon Steel
Material1 : Carbon Steel
Material2 : Zinc
Material3 : Alloy Steel
MaximumShearStrength : 3238
MetalType : Carbon Steel
ModelName : JHWWG-5
ModelNumber : JHWWG-5
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : JHWWG-5
ProductDescription : Application
The Anrik wedge anchor is made from high quality carbon steel, and is zinc plated. The concrete anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull out values in concrete are needed. It is for Concrete only, not for block or brick base material

Diameter of Anchor
The diameter of the anchor is 1/4"

Length Anchor
The length of the anchor is 2-1/4"

Quantity: 20 pieces

Drill Bit Diameter/Hole Diameter
Drill bit diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only)

Thread Length
The length of the threads on the anchor is 1-1/4" in length

Minimum Embedment Depth
The minimum embedment depth into the concrete is 1-1/4"

Torque Value
The required installation torque of the anchor is 4 ft/lbs

Maximum fixture thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for the anchor is 1". This will ensure that the minimum embedment depth of 1-1/4" will be met
ProductSiteLaunchDate : 2012-06-15T00:00:01-07:00
Size : 5 Inch
StreetDate : 2016-10-26T00:00:01Z
Style : Galvanised
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700