Cart 2 india

Specification
Brand : SBTRKT
BulletPoint1 : 1. Made of high quality alloy,not rust,stronger than the base metal - up to 45,900 .
BulletPoint2 : 5. Can be used to gas welding with solder powder,can also be used for arc welding.
BulletPoint3 : 4. Joins all alloys, including those that are not easily joined by high-temperature .
BulletPoint4 : 3. Can use to any heat source.
BulletPoint5 : 2. Low temperature,melting point between 647-658°C.
Color : Brass-1.6mm
ExternallyAssignedProductIdentifier : 9088952054464
FinishType : Finish
IncludedComponents : inc
ItemName : Brass Welding Wire Welding Rod Body Repair Garage Tool Body Work 1.6 2.4 3 DIY Hardware Manufacturing (Color : BRASS-1.6MM)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : welding-wire
Manufacturer : SBTRKT
Material : metal
ModelName : SBTRKT
ModelNumber : SBTRKT
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SBTRKT
PowerSourceType : PowerSource
ProductDescription : Specifications:
name:
Brass Welding Wire Welding Rod
Component: Cr 0.10%, (Fe+Si) 0.3%, Cu 0.05%, Zn 0.05%, Mn 0.15%, Ti 0.1%, AL Balance;
Diameter: 1.6mm 24mm 30mm
Length:500mm+/-10mm;
Melting point:647-658°C;
Quantity per lot: 1.6mm (10pieces), 2.4mm(10pieces), 3.0mm(10pieces).
Packing list：10pcs
Note:
1. The weld bevel and the wire surface must be carefully cleaned before welding.
2. Preheating to 400-500℃ before welding. Copper gas welding solvent must be used as a solvent during welding.
3. The welding flame should adopt neutral flame or slight oxidation flame, appropriately reducing the temperature during welding, increasing the welding speed, minimizing the residence time of the molten pool at high temperature, and then can reduce the evaporation and oxidation of.
ProductSiteLaunchDate : 2024-01-02T13:59:49.778Z
Size : One Size
UnitCount : 1
UnspscCode : 23271800