Cart 2 india

Specification
Brand : GatherTOOL
BulletPoint1 : Product: Aluminum Welding Rods
BulletPoint2 : Melting point: about 380
BulletPoint3 : Diameter: 1.6mm, 2mm
BulletPoint4 : Length: 25cm
BulletPoint5 : Quantities:10pcs/20pcs
BulletPoint6 : AWS ER308, ER308L K
Color : 20pcs
ExternallyAssignedProductIdentifier : 9077714230826
FinishType : Finish
IncludedComponents : inc
ItemForm : Liquid
ItemName : GatherTOOL 10pcs/20PCS Low Temperature Easy Melt Aluminum Welding Rods Weld Bars Cored Wire 1.6/2mm for Soldering Aluminum No Need Solder Powder (Size : 1.6mm, Color : 20pcs)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : welding-wire
Manufacturer : GatherTOOL
Material : Aluminum
ModelName : Lincoln ER308L X 1/8in X 18in X 12 lb stainless TIG welding wire
ModelNumber : 1500104
NumberOfItems : 1
PartNumber : GatherTOOL
PowerSourceType : PowerSource
ProductDescription : Features:
Product: Aluminum Welding Rods
Material: Aluminum
Melting point: about 380
Diameter: 1.6mm, 2mm
Length: 25cm
Quantities:10pcs/20pcs

Package list:
10/20pcs * aluminum welding wire

Applications:
For Aluminum, Iron, Copper materialFeatures:No need solder powder;Great welding effect,with low melting point;Great weldability and corrosion resistance, high thermal conductivity, high electric conductivity;Widely used, mainly used for welding bicycles, locomotive compartments, chemical containers, shipbuilding, etc.;Light weight and easily carry.
Usage:
1. Clean and polish the physical surface.
2. Heat the surface of the metal material until the temperature of wire is up to the working temperature 380 °
3. The aluminum base metal is heated to the appropriate working temperature when repairing thin aluminum, and then use the wire friction and to form a weld.
4. Use propane gas to weld small object and use industrial gas or induction heating device to heat and weld big one, you should cool it naturally after welding.

Attention:
1. The thicker the piece, the more difficult to heat it up, so it is important to use a reasonable heat source.
2. As long as the surface temperature of the base metal reaches the operating temperature of welding wire, you can start to weld.
3. When using Oxyacetylene welding, the neutral flame welding should be used, but please do not burn the wire directly.
4. Applicable heat source: such as propane, oxyacetylene and so on.
5. Storage: please store in a dry and ventilated place.
Note:
1. The surface of the base metal must be clean.
2. The base metal temperature should reach to 420 degrees, including the process of welding the base metal temperature should be maintained at 420°, and the temperature can be high or low.
ProductSiteLaunchDate : 2023-03-30T08:50:29.794Z
Size : 1.6mm
SpecificUsesForProduct : General Purpose
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 23271800