Cart 2 india

Specification
Brand : HNGJULI
BulletPoint1 : 【 Card type 】 The reader support EM-ID card or MI-IC card ,please choose one of you need before purchase. (does not support HID, Cobra, APCiK, etc.)
BulletPoint2 : 【 Waterproof design 】With an outdoor protection rating of IP68, you can rest assured that this reader will withstand all outdoor conditions.
BulletPoint3 : 【 Input voltage 】DC 12V, capable of stable operation for many years
BulletPoint4 : 【 Wiegand switching 】Just shorten or dangle the WG line to ground. Wiegand 26 or 34 switching can be realized
BulletPoint5 : 【 LED indicator light】The card reader will display excellent red and green LED lights.
ExternallyAssignedProductIdentifier1 : 0765483366479
ExternallyAssignedProductIdentifier2 : 765483366479
ItemName : HNGJULI Wiegand26/34 Access Card Reader, Swiping 125Khz EM or 13.56MHZ ID Card, Outdoor Waterproof, Suitable for Access Control System (EMID Card, Wiegand Format)
ItemTypeKeyword : commercial-access-wiegand-card-readers
Manufacturer : HEYGLI
NumberOfItems : 1000
PartNumber : HGL-018
ProductDescription : Product parameters
Product name：Access Control Card Reader
Operating Frequency：125Khz , 13.56Mhz
Sensing distance：0-15CM
Operating voltage：DC 9V-16V
Working current：<50mA
Card reading speed：<0.2S
Operating temperature：-25℃~85℃
Output format：Wiegand 26 or 34
Transmission distance：RWG (100 meters)
Shell material：PVC and spray molded interior can be filled with black resin adhesive (effectively waterproof)
Please Note
The access control reader cannot store user data, and cannot add user cards, passwords, or fingerprint users.
It is just a tool for expanding card swiping or password unlocking, relying on extended reading heads on devices such as access control all-in-one machines, fingerprint attendance machines, and multi door controllers.
Installation precautions
1.The line from the card reader to the controller: it is recommended to use 8 cores to shield the multi-strand twisted pair network cable (of which 2 cores are spared, if the reader lamp feedback legal card can not be connected to the LED line, if the buzzer feedback illegal card can not be connected to the Buzzer line without the card reader's buzzer), the data line Data1 Data0 is a pair of twisted pairs. The wire diameter is recommended to be more than 0.3 square millimeters. The maximum length may not exceed 100 meters. The shield is connected to the GND of the controller.
2. The standard reading distance of the card reader is 5-15cm, the ID card reader reading distance is slightly longer, and the IC card reading distance is slightly shorter. If a keychain type proximity card is used, the reading distance will be shorter, generally 1-3 cm. The way to read the card, it is recommended to use the card directly facing the reading card to naturally approach, the card reading method with the card quickly swiped from the side is not advisable, and does not guarantee the success of the card.
3. The card reader is installed on the metal surface. Since the card reader is a RF product, the metal pair near the front or rear will absorb its RF signal. If the metal surface is large, it may even affect the card reader's ability to read the card, or the card reader's Distance decay is very severe.
ProductSiteLaunchDate : 2024-07-15T15:50:19.255Z
Style : EMID Card, Wiegand format
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43202000