Cart 2 india

Specification
Brand : Aitoserlea
BulletPoint1 : This anemometer is assembled with a specially customized power generation wind speed sensor and a pointer type meter head. Its working principle is that when there is horizontal flow of wind in the environment, the special structure of the wind cup can generate fixed direction rotation and drive the built-in sensor to generate voltage, which is directly proportional to the rotation speed. The change in voltage of this signal is displayed by connecting it to a specially customized pointer type meter.
BulletPoint2 : The maximum allowable environmental wind speed for this anemometer is 75KM/H. Any environment exceeding this wind speed may exceed the range and damage the meter head.
BulletPoint3 : This sensor is spontaneous and does not require power supply. When there is wind rotating, it generates a voltage signal and is displayed by the meter head.
BulletPoint4 : This wind speed sensor is a simple structure with average accuracy and is only suitable for environmental wind speed reference, not suitable for meteorological forecast level applications.
BulletPoint5 : The wind speed sensor should be installed in a horizontal position to ensure that the installation position is not prone to water accumulation and is easy to detect environmental wind speed. The wind speed sensor has a rainproof function, but it is not resistant to soaking in rainwater. The signal output line is about 3 meters long, and when it needs to be extended, it can be connected according to the corresponding color. The wind speed sensor has a height of approximately 6.5CM and a rotating diameter of approximately 14CM.
BulletPoint6 : The base component is made of ABS injection molding technology, with a chassis diameter of 46MM. It is fixed by three holes with a radius of 18MM and a diameter of 6MM distributed at 120 degrees. Three M5 or M6 bolts can be used for fixation. The power generation sensor is fixed in the base, and the signal wire is a two core wire with a default length of about 3 meters. The signal wire is a double parallel wire, with black with white stripes indicating the signal voltage and pure black indicating GND.
Color : Wind speed
ExternallyAssignedProductIdentifier : 7302555070624
IncludedComponents : Wind Speed Sensor
ItemName : Tower Crane Self-Generating Type Wind Speed Sensor Display Instrument Unpowered Anemometer
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : anemometers
Manufacturer : top-tool
Material : Acrylonitrile Butadiene Styrene (ABS)
MeasurementAccuracy : OTHER
ModelNumber : EQBVZZRD
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : WS24042401
PowerSourceType : Corded Electric
ProductDescription : Tower Crane Self-Generating Type Wind Speed Sensor Display Instrument Unpowered Anemometer

Descriptions:
This anemometer is assembled with a specially customized power generation wind speed sensor and a pointer type meter head. Its working principle is that when there is horizontal flow of wind in the environment, the special structure of the wind cup can generate fixed direction rotation and drive the built-in sensor to generate voltage, which is directly proportional to the rotation speed. The change in voltage of this signal is displayed by connecting it to a specially customized pointer type meter.
The maximum allowable environmental wind speed for this anemometer is 75KM/H. Any environment exceeding this wind speed may exceed the range and damage the meter head.
This sensor is spontaneous and does not require power supply. When there is wind rotating, it generates a voltage signal and is displayed by the meter head.
This wind speed sensor is a simple structure with average accuracy and is only suitable for environmental wind speed reference, not suitable for meteorological forecast level applications.
The wind speed sensor should be installed in a horizontal position to ensure that the installation position is not prone to water accumulation and is easy to detect environmental wind speed. The wind speed sensor has a rainproof function, but it is not resistant to soaking in rainwater. The signal output line is about 3 meters long, and when it needs to be extended, it can be connected according to the corresponding color. The wind speed sensor has a height of approximately 6.5CM and a rotating diameter of approximately 14CM.
The base component is made of ABS injection molding technology, with a chassis diameter of 46MM. It is fixed by three holes with a radius of 18MM and a diameter of 6MM distributed at 120 degrees. Three M5 or M6 bolts can be used for fixation. The power generation sensor is fixed in the base, and the signal wire is a two core wire with a default length of about 3 meters. The signal wire is a double parallel wire, with black with white stripes indicating the signal voltage and pure black indicating GND.

Specifications:
Name: Tower Crane Self-Generating Type Wind Speed Sensor
Cable length: 3 Meters
Sensor base diameter: 46MM
Fixing screw size: 6MM
Packing size: 155x138x70MM
Net weight: 135G
Package weight: about 200G

Package includes:
1 x Wind Speed Sensor
1 x Display instrument

How to use it:
Connect the signal wire of the wind speed sensor to the rear terminal of the instrument, the plain black wire to the - sign and the black wire with white stripe to the other post. The wind speed sensor and the meter and the connecting wires should be fixed when using it.
ProductSiteLaunchDate : 2024-04-24T08:12:13.080Z
Size : 0-5V Output
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41110000