Specification AgeRangeDescription : adult Brand : Tomantery BulletPoint1 : WEATHER : Wind speed sensor anemometer possess strong pressure , suitable for all kinds of harsh environment, with strong wind BulletPoint2 : INTERFERENCE : The wind speed sensor has strong prevent interference ability, small and lightweight, easy to carry and assemble BulletPoint3 : EQUIPPED WITH EXTENSION CABLE: The wind speed sensor connection extension line is 0.8m long, the interface has a sealing washer design, BulletPoint4 : WIRING MODE: The wind speed monitoring sensor is compatible with two cable outlet modes, including bottom cable outlet and side cable outlet BulletPoint5 : STRONG MATERIAL: The wind cup is made of excellent ABS material, with high strength, small starting wind speed, and good erosion Color : Red ExternallyAssignedProductIdentifier : 8010935114163 IncludedComponents : Wind speed Sensor ItemDisplayDimensions_Height : 31.5 inches ItemDisplayDimensions_Length : 8.27 inches ItemDisplayDimensions_Width : 8.27 inches ItemName : Wind Speed Sensor Anemometer, 9‑30V High Strength Outdoor Wind Speed Monitoring Sensor for Industrial Use ItemPackageDimensions_Height : 16 centimeters ItemPackageDimensions_Length : 19 centimeters ItemPackageDimensions_Width : 17 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : anemometers Manufacturer : Tomantery Material : Oxford cloth ModelName : Tomanteryfgt2e9r1un ModelNumber : Tomanteryfgt2e9r1un NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : Tomanteryfgt2e9r1un ProductDescription : 1. STRONG MATERIAL: The wind cup is made of excellent ABS material, with high strength, small starting wind speed, and good erosion 2. INTERFERENCE : The wind speed sensor has strong prevent interference ability, small and lightweight, easy to carry and assemble 3. WIRING MODE: The wind speed monitoring sensor is compatible with two cable outlet modes, including bottom cable outlet and side cable outlet 4. WEATHER : Wind speed sensor anemometer possess strong pressure , suitable for all kinds of harsh environment, with strong wind 5. EQUIPPED WITH EXTENSION CABLE: The wind speed sensor connection extension line is 0.8m long, the interface has a sealing washer design,
Spec: Item Type: Wind Speed Monitoring Sensor Material: ABS Size: Approx. 158 x 180 x 70mm / 6.22 x 7.09 x 2.76in Power Supply Voltage: DC9-30V Signal Output: 4-20mA Measurement Range: Wind speed 0~45m/s Extension Line Length: Approx. 0.8m / 2.6ft Accuracy: ±(0.5+0.02V)m/s(V represent real time wind speed value) Resolution: 0.1m/s Startup Wind Speed: ≤0.8m/s Maximum Power Consumption: 0.48W Load Capacity: DC12V power supply, current output impedance ≤350Ω DC24V power supply, current output impedance ≤900Ω, voltage output impedance ≥1KΩ Working Environment: Temperature: -35℃~60℃, Humidity: ≤100%RH non condensing Protection Level: IP64 Widely Used In: Greenhouses, , ships, docks, aquaculture, advertising gate barriers, weather, marine, environmental, airports, ports, laboratories, industrial, agricultural and traffic environments for wind speed measurement Formula: 4-20mA: F=(I-4)/16xA+B F: Wind speed, m/s; I: Sensor output current value, mA; A: Sensor range width(range upper limit minus lower limit); B: Minimum value of sensor range(lower limit of range); Wire Connection Method: Red Output ProductSiteLaunchDate : 2025-05-14T05:07:25.407Z Size : 21X80CM SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnitCount : 1 UnspscCode : 56140000