Cart 2 india

Specification
Brand : MEGICOLIM
BulletPoint1 : ⭐99% ANTI-UV - Car window tint film effectively blocks out 99% of UV rays, which can protect your skin and prevent your car seat from aging and fading. It can also block the sunlight heat and create a comfortable indoor environment.
BulletPoint2 : ⭐2 PLY DESIGN - 2 ply design with a scratch resistant coating, which results in no chances of fading, no bubbling and peeling off even after years of use
BulletPoint3 : ⭐EXPLOSION-PROOF & ANTI GLARE - Strengthen glass, Effectively prevent accidents caused by glass splash. And can effectively block the sun or the car headlamps strong glare light
BulletPoint4 : ⭐NO SIGNAL INTERFERENCE - 2 Ply Nano Ceramic Non-metallized auto window tint film ensures the undisrupted use of radio and cell phones in the vehicle
BulletPoint5 : ⭐INSTALLATION TIPS - Heat gun and professional installation kit for the auto tints is highly recommended for best results. Nano Ceramic film is thicker than most films therefore it can take longer to heat. Using 2 pieces of tape to apply to both sides of the corners and pull to remove the liner protecting the film
Color : 70% Vlt
ExternallyAssignedProductIdentifier1 : 0723548409332
ExternallyAssignedProductIdentifier2 : 723548409332
InstallationType : Peel and Stick
ItemName : 99% Anti UV Nano Ceramic Car Front Windshield Film Heat Control Sun Blocking Solar Tint Film for Car Rear Side Window, 40Inch X 10Feet, 70% VLT, Light Green
ItemPackageDimensions_Height : 1.5 inches
ItemPackageDimensions_Length : 24 inches
ItemPackageDimensions_Width : 1.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-window-tinting-kits
Manufacturer : MEGICOLIM
Material : Polyethylene (PE)
Material1 : Ceramic
Material2 : Polyethylene Terephthalate (PET)
NumberOfItems : 1
PartNumber : KIA-FORTE-SEDAN--2014-2018-20ALL
ProductDescription : Specification:

Material: PET
Self-adhesive
Structure: 2ply
Thickness: 2mil
VLT(Visible Light Transmission): 70%
VLR(Visible Light Reflection): 13%
IR Rej(Infrared Rejection): 95%
UV Rej(Ultraviolet Rejection): 100%
TSER(Total Solar Energy Rejected): 60%
Glare Reduction: 24%
SR Haedness: >2H

Installation Steps:
Step 1. Trim films to the size you want (a little biger than you need)
Step 2. Keep Window or Glass clean Step 3. Wet the Window or Glass with much soapy water
Step 4. Remove the adhesive film from backing liner ( Please make sure you have removed it before you apply the matte window film to glass)
Step 5. Wet the adhesive film with much soapy water
Step 6. Set up film on glass
Step 7. Squeegee away water and air bubbles with scraper
Step 8. Cut off margins and enjoy your works

Quick tip:
1. In order to easily remove the protect backing film, simply use 2 pieces of tape to apply to both sides of the corners and pull.Please spray a lot of water before installation.
Its better to watch the installation video of window film on YouTube before installation.
ProductSiteLaunchDate : 2022-11-30T06:40:28.539Z
Size : 40in x 10ft
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UltravioletLightProtection : True
UnitCount : 1
UnspscCode : 25170000