Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : TRUE LINE Automotive
BulletPoint1 : Computer precut window tint kit for all side and back windows not including windshield.
BulletPoint2 : Does not include installation tools, but is recommended for a successful installation.
BulletPoint3 : Third brake light cut out only on request and only if available to us.
BulletPoint4 : Tint shade can be changed between 5% 20% 35% and 50%.
BulletPoint5 : Includes installation instructions
BulletPoint6 : Installation:Yellow-- Turn Signal Light Positive
BulletPoint7 : Feature: Yellow Wires to Left/Right Front Turn Signal Lamp Positive
BulletPoint8 : Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance
BulletPoint9 : Voltage:12V
Color : 20% All
ExternallyAssignedProductIdentifier1 : 0810088077630
ExternallyAssignedProductIdentifier2 : 00810088077630
ExternallyAssignedProductIdentifier3 : 810088077630
IncludedComponents : automotive-daytime-running-light-kits
InstallationType : Heat Shrink
ItemName : TRUE LINE Automotive Precut Window Tint Kit for Saturn Aura 4 Door Sedan 2007 2008 2009 2010
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-window-tinting-kits
Manufacturer : True Line
Material : Ceramic
ModelName : Air Nano Ceramic
ModelNumber : Air Nano Ceramic
NumberOfItems : 1
PartNumber : 12000699-14
ProductDescription : RockRose Air Nano Ceramic Auto Tint Features: RockRose Auto Tint has proven results on blocking UV, IR, with high heat rejections. Effectively protects your car interior from color fading and deterioration, and effectively provides sun protection for your skin, preventing skin cancer. INSTRUCTIONS: Step 1.Measure the size of the car glass, the length and width of each one plus more than 3 cm, so as not to install the film does not conform to size. Step 2.A clean window is vital a successful factor, so keep window or glass clean. Step 3. Remove the transparent backing sheet from Film .Cover the surface of the whole film with water. This helps to prevent the film becoming tangled and sticking to itself. Step 4. Pick your film up and apply to your window( Please MAKE SURE you have removed the backing sheet before you apply to the window and glass).Soap and water on film and glass can make it slide to the correct position. Step 5. And repeat scraper process, using the scraper to push any remaining moisture or bubbles to the edge of the window. Much easier than Wall Decals. Step 6. Finally use the paper towels to dry the window and the frame, being carefully not to lift the film at the edges or corners. NOTE: 1.Before installing , please check the film carefully, if you find any creases, tears or other defects, please contact us immediately for advice. Don’t remove the backing sheet or attempt to fit your film .We are unable to accept returns or provide refunds if installation has been attempted.
ProductSiteLaunchDate : 2014-06-13T15:58:56.629Z
Size : 40" x 15FT
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UltravioletLightProtection : False
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 12 Months