Cart 2 india

Specification
Brand : GOHIOWU
BulletPoint : wire-cutters
BulletPoint1 : Build to Last: It is made of high-quality multilayer board and stainless steel column, which is wear-resistant and rust-resistant, and can be used for a long time.This product has a simple operation method .Its small size(15.35*12.99 in) will not take up too much tabletop.
BulletPoint2 : High Efficiency: It adopts electric heating wire cutting, and can heat the wire to the required temperature in about 0-5 seconds so that you can quickly and smoothly cut the foam and improve work efficiency.
BulletPoint3 : Precision Cutting: The worktable is carefully designed with scales on all four sides to allow you to accurately measure each piece of material,and the 0.01" heating wire design allows for more accurate cutting and less error, as well as a lower rate of wastage.
BulletPoint4 : Adjustable Design: You can adjust the desired temperature between 32℉ to 572℉ by turning the voltage adjustment knob of the adapter.The cutting height, width, and radius of the cutting circle can also be adjusted, allowing you to achieve precise cutting results.
BulletPoint5 : Enjoy DIY: By adjusting the angle of the support, you can change the position of the wires and cut different shapes of materials, you can easily get cones, squares, cylinders, and other kinds of irregular shapes to fully enjoy the fun of DIY.Suitable for both beginners and professionals to use easily.
Color : Light Blue, Silver
ExternallyAssignedProductIdentifier1 : 0044761729527
ExternallyAssignedProductIdentifier2 : 044761729527
ItemName : Hot Wire Cutter,Hot Wire Foam Cutter,110V Portable Hot Wire Foam Cutter,Working Table Tool Styrofoam Cut Machine
ItemPackageQuantity : 1
ItemTypeKeyword : wire-cutters
Manufacturer : ABSarHu
Material : Stainless Steel,Fiberglass
Material1 : Multilayer Board
Material2 : Stainless Steel
Material3 : Aluminum Alloy
ModelName : Foam Cutting Machine
ModelNumber : hot wire cutter
NominalWallThickness : 1.3 month
NumberOfItems : 1
PartNumber : hot wire cutter foam
ProductDescription :

Specification

Material: Multi-layer Panel and Stainless Steel

Color: Light Blue, Silver

Input Voltage: 100-240V AC

Output Voltage: 18V/4A DC

Power: 72w

Plug: US Standard

Adjustable Temperature Range: 0-500°C/0- 932°F

Cutting Height: 0-25cm/0-9.84inch

Heating Wire Diameter: 0.28mm/0.01in

Cutting Width: 0-28cm/0-11.02in

Worktable Width: 33cm/12.99in

Workbench length: 39cm/15.35in

Packing Size: 44*38*10cm/17.32*14.96*3.93in

Gross Weight: 3.5kg/7.7lbs

Net Weight: 3kg/6.6lbs

Package Included

1* Worktable

1* L-shape Conductive support

1* Guiding Rule

1* Circular Die

1* Angle Board

1* Adapter

1* English Manual

All Accessories for Use

Notes

1. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. Check whether the product accessories are complete, if missing, please contact customer service in time.

2. Do not touch the heating wire of the cutting machine when the power is on. Keep a certain distance from the heating wire. If necessary, wear gloves to avoid scalding. The heating wire should not be too red, otherwise, it is easy to break, and the life of the adapter will be affected.

3. Please use the product in a ventilated environment. Children need to use it under the supervision of adults.

4. Please turn off the power when the product is not in use. Long-time idle burning may cause damage to the machine.

5. Please note that it is not suitable for fireproofing materials.

6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2025-04-17T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword : Unisex Adult
UnitCount : 1
UnspscCode : 27112700
WarrantyDescription : /