Cart 2 india

Specification
Brand : Stock Wire
BulletPoint1 : #6 AWG Commercial Wiring for Outlets, Switches and Other Loads
BulletPoint2 : Contains Copper (Cu) Conductors Made with Annealed (Soft), Compressed Copper
BulletPoint3 : Can be Used in Wet or Dry Locations. Insulation is High Heat and Moisture Resistant Polyvinyl Chloride (PVC). Jacket is Abrasion, Moisture, Gasoline, and Oil Resistant Nylon
BulletPoint4 : Has an Allowable Ampacity of: 55 Amps at 60 Degrees Celsius, 65Amps at 75 Degrees Celsius, and 75 Amps at 90 degrees Celsius
BulletPoint5 : Rated for 600-Volts with a Heat Capacity of up to 60 Degrees Celsius in Wet Locations and 105 Degrees Celcius in Dry Locations.
Color : Brown
ConnectorType : Crimp
ExternallyAssignedProductIdentifier : 4851156215192
ExternallyAssignedProductIdentifier1 : 0682550997353
ExternallyAssignedProductIdentifier2 : 682550997353
FinishType : Polished
GpsrSafetyAttestation : 1
IncludedComponents : wire
ItemForm : Coil
ItemName : 6 AWG 19-Stranded THHN Brown Copper Building Wire (45ft cut)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemShape : Round Rod
ItemTypeKeyword : electrical-wires
Manufacturer : Stock Wire
Material : Copper
MaximumVoltage : 600 volts
MeasurementSystem : Imperial
ModelNumber : THHN6BROWN
NumberOfItems : 10
NumberOfWires : 2
OperatingVoltage : 600 volts
PartNumber : THHN6BROWN
ProductDescription :

Applications:
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). 6 AWG THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C in oil or coolants. Applications requiring Type AWM conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations. Most common building wire used often on sub-panels, hot tubs & jacuzzis.

Also Known As:
Copper wire, THWN-2 Wire, building wire, hook up wire, conduit wire, hot tub wire, lighting wire, nylon copper wire, construction cable, 6 gauge wire

Features
Nylon outer jacket for easy pulling. VW-1 rated 14 AWG - 6 AWG. All sizes are rated gasoline and oil-resistant II.

Jacket:
A tough, polyamide, Nylon outer covering per UL-1063 and UL-83.

Standards:
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
NEMA WC70/ICEA S-95-658
Institute of Electrical and Electronics Engineers

Constrction:
Insulation:Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-8

Specifications:
Size:6 AWG
Number of Strands:19
PVC Insulation Thickness (Conductor):0.760 mm / 0.030 inches
Nylon Jacket Thickness:0.130 mm / 0.005 inches
Outside Diameter:6.30 mm / 0.248 inches
Weight per Foot: 0.109 lbs
Allowable Ampacity:55 Amps at 60℃ / 65 Amps at 75
ProductSiteLaunchDate : 2019-07-29T07:00:00.000Z
RecommendedUsesForProduct : Electrical Wiring
Size : 45ft cut
SpecificationMet : UL
Strands : Multi Strand
StudSize : 3/8
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TemperatureRating : 600 degree celsius
TerminalType : Ring Terminal
UnitCount : 1
UnspscCode : 26121500
Voltage : 600 volts