Cart 2 india

Specification
Brand : Utoolmart
BulletPoint1 : 【DIMENSION】-3mm 4mm 5mm 6mm 8mm 10mm bore 8mm thickness drill stop. Hex wrench is included to help adjust and install the stop rings.
BulletPoint2 : 【MATERIAL】-Strong and durable steel with black-oxide finished for better corrosion-resistance. Set screw type will stay sturdy when tightened and is specially designed not to break the bits.
BulletPoint3 : 【ADJUSTABLE】-Drill stop bit can be quickly and easily adjusted at any point on drill bit flutes, helps to drill holes to exact depths, prevents under and over drilling.
BulletPoint4 : 【APPLICATION】-Set-screw type drill stop is suitable for low axial loads and simple positioning. It is great for jobs that use a bit and need precision.
BulletPoint5 : 【NOTICE】-For maximum holding power, make sure the set screw material is harder than your shaft material. Do not move the drill bit stop after tightening.
CareInstructions : Manufacturer
Color : Black
CompatibleFastenerDescription : 0.25 inches
CuttingAngleString : 135.0 degrees
DrainType : Grid
DriveSystem1 : Phillips
DriveSystem2 : Pozidriv
DriveSystem3 : Torx
ExternallyAssignedProductIdentifier : 4962485361327
ExternallyAssignedProductIdentifier1 : 4010995390402
ExternallyAssignedProductIdentifier2 : 04010995390402
ExternallyAssignedProductIdentifier3 : 8421152040041
ExternallyAssignedProductIdentifier4 : 08421152040041
FinishType : Black Oxide
GpsrSafetyAttestation : 1
IncludedComponents : No
InstallationType : Recessed
ItemDisplayDimensions_Height : 18.5 centimeters
ItemDisplayDimensions_Length : 7 centimeters
ItemDisplayDimensions_Width : 1.5 centimeters
ItemDisplayWeight : 22 kilograms
ItemLength : 25 millimeters
ItemName : Utoolmart 3mm 4mm 5mm 6mm 8mm 10mm Bore Drill Stop, Drill Bit Depth Holder, Set Screw Style, Black Oxide Carbon Steel 6pcs
ItemPackageDimensions_Height : 13.3 centimeters
ItemPackageDimensions_Length : 0.8 centimeters
ItemPackageDimensions_Width : 7.3 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : wood-drill-bit-sets
Manufacturer : Utoolmart
Material : Carbon Steel
ModelName : Centroval
ModelNumber : 39040
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 12
PackageLevel : unit
PartNumber : UT190917D-0012
ProductDescription : Utoolmart Bore Drill Stop Drill Bit Depth Holder

Technical Parameters
Finish Type:Black Oxide
Material:Carbon Steel
Color:Black
Size:3mm/0.12 inch;4mm/0.16 inch;5mm/0.20 inch;6mm/0.24 inch;8mm/0.31 inch;10mm/0.39 inch

Product Feature
1.Set-Screw type drill stop is suitable to use on a shaft softer than the set screw.
2.Slide the stop ring onto an unhardened shaft and tighten the set screw, the set screw would bite into the shaft and hold it.
3.This type of drill bit stop features great torque capacity and holding power.
4. The drill stop is suitable for low axial loads and simple positioning. Applications that require repositioning or high axial loads are not applicable.
5.Can be used to limit the movement of a shaft and retain power transmission components such as sprockets, pulleys, and bearings.
6.Mainly for fixing the drill bit, limited the depth of drill holes, make depth of the hole consistent. More convenient to round wood mortise of use.

Notes
1.In order to maximize the holding power, the shaft must be softer than the set screw.
2.Tightening the set screws will cause damage to the surface of the shaft, which is an inevitable disadvantage. Please do not move it after locking. To prevent this, small flats are often added under the set screw.

Package Content
6in1 Set x Drill Bit Stop

ProductSiteLaunchDate : 2019-09-24T03:40:26.158Z
Size : 6in1 Set
StreetDate : 2018-03-21T00:00:01Z
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27111700