Cart 2 india

Specification
Brand : MRbrew
BulletPoint1 : 【CHILLS WORT IN MINUTES!】MRbrew 30-plate wort chiller cools wort faster than the immersion chiller by increasing surface area covered by cold water and running wort between plate and plate meanwhile. Gone for you are the days of an immension chiller that takes hours!
BulletPoint2 : 【HIGHLY SAVE YOUR WALLET】This super-efficient chiller uses less water than any other chiller on the market, the wort is flowing through the chambers inside the plate chiller and aerates for your pitching yeast, you will save water and and cost of buying an aeration stone and CO2 canisters, it is especially great for brewers in southern climates!
BulletPoint3 : 【NO LEAKS & RUST-FREE】This wort chiller's plates and fittings are made of 304 stainless steel and have been brazed together with pure copper in an oxygen-free furnace, there is no potential for leaks and rust, can withstand -321F to 392F. Do remember to clean the inlets and outlets to remove metal debris before use!
BulletPoint4 : 【GREAT UPGRADE】The newly upgraded Barb Wort Chiller is suitable for I.D 1/2'' hose tube. It has extremely low restrictions. Compared with the threaded Wort Chiller, this newly upgraded barbed Wort Chiller is more convenient and can be directly connected to the hose and start cooling work. No need to bother buying other accessories to be compatible with the hose, saving a lot of time!
BulletPoint5 : 【EASY TO USE AND CLEAN】The Wort Chiller is designed for effortless cleaning—simply rinse with a cleaning solution and water for thorough maintenance. Ideal for both laboratory and home beer brewing, it efficiently facilitates heat exchange between two liquids, saving you time and delivering exceptional cooling performance.
BulletPoint6 : 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew 30 plates wort chiller is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!
CareInstructions : Hand Wash
Color : Yellow
GpsrSafetyAttestation : 1
IncludedComponents1 : 1* Wort Chiller
IncludedComponents2 : 4* Hose Clamps
ItemName : MRbrew Wort Chiller 20 Plates, 1/2 Barb Fitting Connection, Brazed Plate Copper Heat Exchanger for Homebrew, Stainless Steel 7.5" x 2.9" Plate, Hot Liquid Accelerated Cooler Quick Beer Cooling System
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : beer-brewing-wort-chillers
Manufacturer : MRbrew
Material : Stainless Steel
ModelName : MR-WCWB-20
ModelNumber : MR-WCWB-20
NumberOfBoxes : 1
NumberOfItems : 1
ProductDescription : MRbrew BRAND HIGH-QUALITY 30-PLATE WORT CHILLER BRINGS HOMEBREWING SURPRISE TO YOU!

The fastest and the most efficient tool to chill your wort to yeast pitching temperature
There is no need to recirculate the wort back into the kettle because it is already cooled to the temp you need when out of the chiller
The wort chilling rate is depending on tap water temperature and rate of flow, colder of water, more slowly of wort flow, chilling is faster

ABOUT SPECIFICATIONS
Four ports barb: 1/2’’ Barb
Dimensions: 7.5" L x 2.9" W x 2.9" H

OPERATION TIPS
1. Soak the wort side in a suitable cleaning solution
2. Rinse with water, after filling it with cleaning solution, tip it from side to side to make sure air bubbles escape
3. Let dry after it has been flushed
4. Connect wort-in port to the mash tun
5. Connect wort-out port to your fermenter
6. Connect water-in port to garden hose getting cool water
7. Connect water-out port to garden hose to remove warm water
8. Turn on the cooling water first and then open the valve on your pot to start the wort flow
9. Flush the wort side of the chiller with plenty of clean water immediately after use
10. To remove deposits, soak in a suitable cleaner for 4 hours and then flush

TEST THE WATER SIDE
Check leaks by running your garden hose briefly before cooling wort
Use a KettleScreen on the inside of your pot to prevent large particles in the wort from clogging your chiller

AVOID FREEZING & CHLORINE BLEACH
If the chiller is allowed to freeze with liquid inside it, it could damage the plates
Dilute chlorine bleach will rust the chiller if left in contact for more than 4 hours

NOTE:
Please careful on the first use, the bottom of the chiller is a little sharp!!!

YOU WILL SURPRISINGLY GET
1* 30-Plate wort chiller
ProductSiteLaunchDate : 2025-01-17T08:05:28.362Z
Size : 20-plates
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24131500