Cart 2 india

Specification
Brand : Hy-Pro
BulletPoint : Price For: Each Max. Fluid Temp.: 210 Degrees F Mesh: 0.025" Item: In-Line V Strainer Screen Material: 304 Stainless Steel Standards: Lead Free Complaint Connection Type: FNPT x FNPT Housing Material: Lead Free Cast Copper Silicon Alloy Max. Pressure: 250 psi Pipe Size: 1/2" Width: 2-3/4" Length: 2-3/4" Height: 2-5/8" Country of Origin (subject to change): United States
BulletPoint1 : Bundle includes 3 Items: (1) Hypro 3350-0058P Nylon Line Strainer with (1) 1700-0057 Buna O-Ring and (1) 3800-0042 Stainless Steel 80 on 20 Mesh Screen
BulletPoint2 : White type 6 nylon cap, clear polyamide bowl
BulletPoint3 : 50 mesh stainless steel screen comes standard on strainer
BulletPoint4 : 1" female NPT threads
BulletPoint5 : Rated for 150 psi @ 70° Fahrenheit, 100 psi @ 125° Fahrenheit ; Max. 140° Fahrenheit fluid temperature
ExternallyAssignedProductIdentifier1 : 0698035182930
ExternallyAssignedProductIdentifier2 : 698035182930
ItemName : Hypro 3350-0058P Nylon Line Strainer with 1700-0057 Buna O-Ring and 3800-0042 Screen 80 on 20 Mesh (Bundle, 3 Items)
ItemPackageDimensions_Height : 22.7 centimeters
ItemPackageDimensions_Length : 9.2 centimeters
ItemPackageDimensions_Width : 15.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-plumbing-y-strainers
Manufacturer : Hypro
Material : Nylon strainer, Buna o-ring, stainless steel screen
NumberOfItems : 1
PartNumber : YSS-75
ProductDescription :

This bundle includes 3 items: (1) Hypro 3350-0058P Nylon Line Strainer with (1) 1700-0057 Buna O-Ring and (1) 3800-0042 Stainless Steel 80 on 20 Mesh Screen.

These Hypro 3350 Series Nylon Line Strainers filter out debris that may be drawn into your pump. They are used for suction and higher pressure applications, capable of achieving up to 150 psi at 70° Fahrenheit and 100 psi at 125° Fahrenheit. The cap on this Hypro 3350-0058P Line Strainer / Suction Strainer is made with white type 6 nylon, while the bowl is made with clear polyamide material for visual inspection without disassembling.

The line strainer is installed on the inlet side of the pump. If you are using a centrifugal pump, install the strainer on either the inlet or discharge side, keeping in mind the strainer's pressure rating, flow capacity, and other installation factors must be considered. NOTE: Clear polyamide bowls CANNOT be used for handling alcohol.

You can clean the strainer without removing it from the line by unscrewing the bowl from the cap, removing the screen, and flushing out any sediment. Then fit the screen to the flange in the bowl and turn hand tight to reassemble. NOTE: CANNOT be used for fatigue-loading applications (eg. water-softeners).

ProductSiteLaunchDate : 2017-11-03T07:00:00.000Z
UnitCount : 1
UnspscCode : 30000000